Service Manual

Field Settings SiUS071735E
119 Trial Operation and Field Settings
Wireless Remote
Controller
(BRC082A43)
To set the field settings, you have to change:
 Mode No.
 First code No.
 Second code No.
1. When in normal mode, hold down /TEST button for at least 4 seconds to enter the Field Set
mode.
2. Select the desired Mode No. with MODE button.
3. Press button and select the First code No.
4. Press button and select the Second code No.
5. Press RESERVE button to confirm the settings.
6. Press /TEST button to quit the Field Set mode and to return to normal display again.
RESERVE button
Mode No.
Field setting mode
UP button
DOWN button
First code No.
Second code No.
MODE button
(R25096)
INSPECTION/TEST
button