Operating Manual

 How to clean air outlet, outside panels and remote controller
1. Clean with soft cloth�
2. When it is difcult to remove stains, use water or neutral
detergent�
NOTE
• Do not wash the suction grille with water of 122°F (50°C) or higher�
It may cause discoloration and deformation�
• When drying the suction grille, do not heat it with re. It may cause burning.
• Do not use substances such as gasoline, benzene, thinner, polishing powder and liquid insecticide sold in the market�
It may cause discoloration and deformation�
 Prior to a long period of non-use
1. Operate the FAN mode for several hours on a ne day to dry out
the inside�
1) Pressthe“MODE”selectorbuttonandselect“FAN”operation.
•Whenamultioutdoorunitisconnected,makesuretheHEAToperationisnotbeingusedinotherroomsbeforeyou
use the FAN operation.
Page 5
2) Pressthe“ON/OFF”buttonandstartoperation.
2. After operation stops, turn off the circuit breaker for the room
air conditioner�
3. Clean the air lters and reattach them.
Page 7
4. To prevent battery leakage, take out the batteries from the
remote controller� (Only for the wireless remote controller)
 We recommend periodical maintenance
•In certain operating conditions, the inside of the air conditioner may get foul after several seasons of use, resulting in poor
performance. It is recommended to have periodical maintenance by a specialist.
•For specialist maintenance, please contact the dealer where you bought the air conditioner.
•The maintenance cost must be borne by the user.
English 8
English
01_EN_3P500431-1.indd 8 10/12/2017 11:57:50