Specifications

SiBE12-519 Printed Circuit Board Connector Wiring Diagram
Printed Circuit Board Connector Wiring Diagram 31
1.4 Outdoor Unit
Connectors
Note: Other Designations
PCB Detail PCB(1): Filter PCB
1) S10, S45, AC1, AC2 Connector for terminal strip
2) S11, HL1, HN1 Connector for control PCB
3) S12, HL2, HN2 Connector for filter PCB
4) S20 Connector for electronic expansion valve coil A port
5) S21 Connector for electronic expansion valve coil B port
6) S30 Connector for compressor
7) S40 Connector for overload protector
8) S70 Connector for fan motor
9) S80 Connector for four way valve coil
10)S90 Connector for thermistor
(outdoor air, heat exchanger, and discharge pipe)
11)S91 Connector for thermistor (gas pipe and liquid pipe)
12)S92 Connector for fin thermistor
13)HC3, HC4 Connector for capacitor
14)HR3, HR4 Connector for reactor
1) LED A Service monitor LED (green)
2) FU1,FU2 Fuse (3.15A / 250V)
3) FU3 Fuse (20A / 250V)
4) V1,V2,V3 Varistor
5) DB1 Diode bridge
6) J9 Jumper for maximum power input limitation
(For cooling only type. Refer to installation manual.)