Specifications

SiBE12-519 Instruction
System Configuration 113
FTK(X)S20/25/35C
Care and Cleaning
CAUTION
■
Indoor unit, Outdoor unit and Remote controller
1. Wipe them with dry soft cloth.
■
Front grille
1. Open the front grille.
• Hold the grille by the tabs on the two sides and lift
it unitl it stops with a click.
2. Remove the front grille.
• Supporting the front grille with one hand, release
the lock by sliding down the knob with the other
hand.
• To remove the front grille, pull it toward yourself
with both hands.
3. Clean the front grille
• Wipe it with a soft cloth soaked in water.
• Only neutral detergent may be used.
• In case of washing the grille with water, dry it with
cloth, dry it up in the shade after washing.
4. Attach the front grille
• Set the 3 keys of the front grille into the slots
and push them in all the way.
• Close the front grille slowly and push the grille
at the 3 points.
( 1 on each sides and 1 in the middle.)
• Check to see if the rotating axis in the upper
center section is moving.
CAUTION
Units
• Don’t touch the metal parts of the indoor unit. If you touch those parts, this may cause an injury.
• When removing or attaching the front grille, use a robust and stable stool and watch your steps carefully.
• When removing or attaching the front grille, support the grille securely with hand to prevent it from falling.
• For cleaning, do not use hot water above 40
°
C, benzine, gasoline, thinner, nor other volatile oils, pol-
ishing compound, scrubbing brushes, nor other hand stuff.
• After cleaning, make sure that the front grille is securely fixed.
Before cleaning, be sure to stop the operation and
turn the breaker OFF.
Fit the key
into the slot.