Specifications

Installation of indoor unit EDUS281104
90 Installation of indoor / outdoor unit
3PN06240-3E
5
DANGER
• Do not install unit in an area where flammable materials are
present due to the risk explosion resulting in serious injury or
death.
WARNING
• If the supporting structural members are not strong enough
to take the unit’s weight, the unit could fall out of place and
cause serious injury.
NOTE
• Install the indoor and outdoor units, power supply wire and
connecting wires at least 3.5ft. away from televisions or
radios in order to prevent image interference or noise.
(Depending on the radio waves, a distance of 3.5ft. may not
be sufficient enough to eliminate the noise.)
(2) Ceiling height
This indoor unit may be installed on ceilings up to 10.5 ft.
in height.
(3) Use suspension bolts for installation. Check whether
the ceiling is strong enough to support the weight of
the unit or not. If there is a risk, reinforce the ceiling
before installing the unit.
(Installation pitch is marked on the paper pattern for instal-
lation. Refer to it to check for points requiring reinforcing.)
(length: in.)
4. PREPARATIONS BEFORE INSTALLATION
(1) Relation of ceiling opening to unit and suspension bolt
position
■ Installation is possible when ceiling opening dimensions is
as follows.
• When installing the unit within the frame for fixing false
ceiling.
Model H
FCQ24·30·36·42MVJU 11 3/4 or more