Service manual

Disassembly and Maintenance ESIEN05-04
5–62 Part 5 – Disassembly and Maintenance
3
1
55
2 Insert the drain hose into
the hose plug of the drain
pump up to the root of
plug securely.
Q Inserting the drain hose should
be executed before installation
of float switch in order to
prevent the float switch from
damage.
Q Put the tie wrap on the white
line on the hose inserted.
Q When inserting the drain hose,
be sure to wear safety gloves
to prevent your finger from
injury with heat exchanger fin.
3 Put the tie wrap on the
hose.
Step Procedure Points
(S2666)
(S2668)
White line
(S2667)