Service manual

Troubleshooting ESIEN05-04
3–24 Part 3 – Troubleshooting
3
1
3
4
5
4 Press the UP or DOWN button to change the error code upper digit until the receiver of
the remote control starts to beep.
5 Press the MODE selector button.The right “0” (lower digit) indication of the error code
flashes.
Step Action
If you hear... Then...
2 short beeps The upper digit matches.
1 short beep No digits match.
1 continuous beep Both upper and lower digits match.
UP
DOWN
UP
DOWN
MODE