Specifications

ManualsBrandsDaikin ManualsAir ConditionerFBQ71BV1

System Configuration

•Up to 64 groups of indoor units(128 units) can be connected, and ON/OFF, temperature setting and

monitoring can be accomplished individually or simultaneously. Connectable up to 2 controllers in one

system.

Note 2

DCS302CA61

Central remote controller2

•Up to 16 groups of indoor units (128 units) can be easily controlled using the large LCD panel. ON/OFF,

temperature settings and scheduling can be controlled individually for indoor units.

Note 3

DCS303A51

Residential central remote controller1

•Up to 16 groups of indoor units(128 units) can be turned, ON/OFF individually or simultaneously, and

operation and malfunction can be displayed. Can be used in combination with up to 8 controllers.

Note 2

DCS301BA61

Unified ON/OFF controller3

KJB212AAElectrical box with earth terminal (2 blocks)3-1

KEK26-1ANoise filter (for electromagnetic interface use only)3-2

KJB311AAElectrical box with earth terminal (3 blocks)2-1

DTA102A52

Interface adaptor for SkyAir-series7

DTA107A55

DTA103A51

Wiring adaptor for other air-conditioner9

No. Item Model No. Function

•Up to 1024 units can be centrally controlled in 64 different groups.

•Wiring restrictions (max. length: 1,000 m, total wiring length: 2,000 m, max. number of branches: 16)

apply to each adaptor.

DTA109A51

D -NET

Expander Adaptor

•Fixing plate for DTA109A51KRP4A92

Mounting plate10-1

•Adaptors required to connect products other than those of the VRV System to the high-speed DIII-NET

communication system adopted for the VRV System.

* To use any of the above optional controllers, an appropriate adaptor must be installed on the product unit to be

controlled.

For UAT

(

)

-K

(

)

,FD-K

For SkyAir, FD

(

)

M-FA, FDY-KA

FDYB-KA, FVY(P)J-A, FXUQ-MA

Central control adaptor kit

Notes: 1. Installation box for adaptor must be obtained locally.

2. For FXUQ-MAV1, an interface adaptor (DTA102A52) for the SkyAir series is necessary. For residential indoor units, an interface adaptor (KRP928BB2S or DTA112BA51) is required for each indoor unit.

3. For residential use only. Cannot be used with other centralised control equipment.

4. A wiring adaptor (KRP413AB1S) is also required for each indoor unit.

•Programmed time weekly schedule can be controlled by unified control for up to 64 groups of indoor units

(128 units). Can turn units ON/OFF twice per day.

Note 2

DST301BA61

Schedule timer

KRP928BB2S

5-room centralised controller

for residential indoor units

DTA112BA51

Interface adaptor for residential

indoor units

Building Management System

•Interface unit to allow communications between VRV and BMS. Operation and monitoring of air-

conditioning systems through

LONWORKS

communication.

DMS504B51

•Expansion kit, installed on DMS502B51, to provide 2 more DIII-NET communication ports. Not usable

independently.

DAM411B513-1

•Enables ON/OFF command, operation and display of malfunction; can be used in combination with up to

4 units.

DPF201A515

•Enables temperature measurement output for 4 groups; 0-5VDC.DPF201A526

•Enables temperature setting input for 16 groups; 0-5VDC.DPF201A53

No. Item Model No. Function

*2 Interface for use in LONWORKS

•Interface unit to allow communications between VRV and BMS. Operation and monitoring of air-

conditioning systems through BACnet

communication.

DMS502B51

*1 Interface for use in BACnet

Optional DIII board

Contact/analogue

signal

Parallel interface

Basic unit

Temperature

measurement units

Temperature

setting units

•Air conditioner management system that can be controlled by personal computers.

DAM602B51

KJB411A

DAM602B52

256 units

DAM602B51

2512 units

DAM602B51

3768 units

DAM602B51

41024 units

intelligent Manager III

128 units

Number of

units to be

connected

HardwareBasic

•Expansion kit, installed on DMS502B51, to provide 16 more wattmeter pulse input points. Not usable

independently.

•External temperature sensor for intelligent Manager III.

DAM412B51

DAM101A51

Optional Di board

Optional DIII Ai unit2-4

•8 pairs based on a pair of On/Off input and abnormality input.DEC101A51Di unit2-5

3-2

1-1

1-4

Electrical box with earth terminal (4 blocks)

DCS601A52

1-1

•Additional 64 groups (10 outdoor units) is possible.

DCS004A511-3

•Monitors and controls the air conditioning system using the Internet and a Web browser application on a PC.

•Wall embedded switch box.

DCS601C51 •Air-Conditioning management system that can be controlled by a compact all-in-one unit.

Communication line

Notes: *1.

BACnet

is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE).

*2. L

ONWORKS

is a trademark of Echelon Corporation registered in the United States and other countries.

*3. Installation box for adaptor must be obtained locally.

DCS002C51

1-2

intelligent Touch

Controller

DIII-NET plus adaptor

Web

intelligent Touch Controller

PPD

Hardware

Software

Basic

Option

•PPD: Power Proportional Distribution function

•4 pairs based on a pair of On/Off input and abnormality input.DEC102A51Dio unit2-6

2-1

2-2

2-3

•Power Proportional Distribution functionDAM002A51

Option

Software

2-1

•

Monitors and controls the air conditioning system using the Internet and a Web browser application on a PC.

DAM004A512-2

•ECONO (Energy saving functions.)DAM003A51

PPD

Web

ECONO2-3

•Interface between the central monitoring board and central control units.

DCS302A528

Unification adaptor for

computerised control

For FCQ-B, FFQ-B, FBQ-B

For FTKS-D/F, FDKS-EA/C(A)

•Up to 5 indoor units can be controlled. This is a low cost system which can only control ON/OFF.

Note 4

KRC72

For FTKS-D/F, FDKS-EA/C(A)