Specifications

30
Ceiling Suspended Cassette Type
Connection unit series indoor units
* A type of BEV unit is necessary for each Connection unit series indoor unit. Refer to the Engineering Data for details.
* Group control between Connection Unit series equipment within one system is possible. However, group control with the other
VRV indoor units is not possible.
cfm
kW
(*1)
(*2)
Kcal/h
(*1)
Power supply
8.3
7,100
1-phase, 220-240 V, 50 Hz
Btu/h
(*1)
28,300
Indoor unit
Airflow rate (H/L)
Casing
mmDimensions (H
X
W
X
D)
kgMachine weight
Piping
connections
Liquid
Gas
Drain
VP 20 (External Dia. 26/Internal Dia. 20)
25
White (10Y9/0.5)
671/494
165
X
895
X
895
9.5 (Flare)
15.9 (Flare)
11.6
10,000
39,600
31
1,024/741
230
X
895
X
895
14.5
8.0 11.2 14.0
12,500
49,500
Sound level (H/L) dB(A) 40/35 43/38 44/39
31
1,130/812
230
X
895
X
895
mm
Cooling capacity
MODEL
Indoor unit
Connection unit BEVQ71MAVE
FXUQ71MAV1
BEVQ100MAVE
FXUQ100MAV1
BEVQ125MAVE
FXUQ125MAV1
Note: Specifications are based on the following conditions;
•Cooling: (*1) Indoor temp. of 27°CDB, 19.5°CWB, and outdoor temp. of 35°CDB.
(*2) Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB.
•Equivalent piping length: 7.5 m
•Level difference: 0 m
•C
apacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)
•Sound level: Anechoic chamber conversion value, measured at a point 1.5 m below the unit centre.
During actual operation, these values are normally somewhat higher as a result of ambient conditions.
kWPower consumption 0.189 0.298 0.298
m
3
/min 19/14 29/21 32/23
230 V