User`s manual

65
Heat pump
BRC7F632F
A signal receiver must be added to the indoor unit.
Note: Remote controller cable not
included. Cables must be
procured locally.
Wireless remote controller and signal
receiver unit are sold as a set.
Wired LCD remote controller
with weekly schedule timer
Wireless LCD remote controller
BRC1D61
Signal receiver unit
(Installed type)
• • • • • •
*1
• • • • • •• • ••• • • • • • • • • • • •
Heat pump
Mould
prevention
Comfort Work & Servicing Control features OthersOption
Feature
Features
Model
Accessory required for indoor unit
Option
*
1
Applicable when wired remote controller is used
CEILING MOUNTED CASSETTE TYPE
FCQ71K/100K/125K/140K
Heat pump
Swing pattern selection Draft prevention function Switchable fan speed
Auto swing
Programme "Dry" High ceiling application Hot start Year-round cooling applicable Timer selector Drain water lift-up mechanism Pre charged for up to 30 m Long-life filter Mould-resistant treatment for filter Filter sign Ceiling soiling prevention Low gas pressure detection Emergency operation Self-diagnosis function
Ultra long-life filter
•
High-efficiency filter
Fresh air intake kit Control by 2 remote controllers Auto-cooling/heating change-over Auto-restart Control by 1 remote controller External command control Central remote control Interlock control PE fin Two selectable thermo-sensors
Round Flow
ROUND FLOWROUND FLOW
Airflow
distribution
Creates uniform
comfort throughout
the space
Comfort enhanced by new airflow!
With uniform temperature
distribution
Enhanced Comfort
Greater comfort
Improved energy saving
• Condition after exposure
to the smoke of 600
cigarettes in 1 m
3
enclosed space.
Treated
surface
Untreated
surface
Grimy
surface
Resists
soiling
External panels are treated with a new coating that
repels dirt.
Anti bacterial treatment, that includes
silver ions is used which may assist in
preventing the growth of microorganisms
that cause smells and clogging.
Avoids ununiform temperature and uncomfort caused by drafts.
To prevent dirt sticking to the
external panels, they have
been coated with a new
surface treatment.
Because air flows out of corner outlets, comfort is more widely spread than before.
Full 360° airflow Air movement is gentle with Round Flow
Dew does not easily form on and dirt
does not cling to non-flocking louvres.
Less cleaning is needed because
minimal dirt is attracted.
Non-flocking horizontal louvres New bactericidal treatment
for drain pan
Prevents mould and microorganisms
growing out of the dust and moisture
that adheres to the filters.
Filter has anti-mould and
bactericidal treatment
Grime prevention and bactericidal coating: Cleanly performance improved.
Easily adapts to the installation space.
Note: Whatever the discharge direction, the same type of panel is used. If installing for other than all-round flow, an air discharge outlet sealing member (option) must be used to
close each unused outlet.
3-way flow
L-shaped
2-way flow
Opposite
2-way flow
(E.g., installed in
a corner)
(E.g., installed in
a long room)
(E.g., installed
near a wall)
(E.g., installed in
middle of ceiling)
4-way flow also possible.
All-round flow
Full 360° airflow
can maintain
comfort even if air
discharge speed is
lower.
Typical flow patterns There are a total of 23 flow patterns.
If you raise the set temperature by 1 to 1.5°C in cooling (and lower in heating),
and velocity is decreased by 25%, You still obtain the same feeling temperature and comfort.
NEW