Service manual

Specifications ESIE04-01
1–50 Part 1 – System Outline
3
11
4
5
3.6 FDQ
Technical
specifications
The table below contains the technical specifications.
Electrical
specifications
The table below contains the electrical specifications.
Specification FDQ125B7V3B
Heat exchanger Rows x stages x fin pitch 3 x 14 x 1.75
Face area 0.338 m²
Tube type Hi-XSS diam. 7
Fin type Rhombus
Fan Air flow rate cooling (high) 43.0 m³/min
Air flow rate cooling (low) 43.0 m³/min
Air flow rate heating (high) 43.0 m³/min
Air flow rate heating (low) 43.0 m³/min
Qty x model 1 x DPA216-178NB
Fan speed Phase cut control (direct drive)
Fan type Sirocco
Refrigerant Type R410A
Safety and functional devices Fan motor thermal use
Air filter Optional
Temperature control Microprocessor thermostat for
cooling and heating
Insulation Heat Both liquid and gas pipes
Sound absorbing
Weight Unit 59.0 kg
Gross 80.0 kg
Specification FDQ125B7V3B
Unit Phase 1~
Voltage 230 V
Frequency 50Hz
Fan motor Nominal running current
Power consumption
No. of motors x output 1 x 500 W
RZQ - Final.book Page 50 Monday, September 20, 2004 11:24 AM