Service manual

Specifications ESIE04-01
1–44 Part 1 – System Outline
3
11
4
5
3.2 RZQ71, RZQ100 and RZQ125
Technical
specifications
The table below contains the technical specifications.
Specification RZQ71B7V3B RZQ100B7V3B RZQ125B7V3B
Compressor
Model 2YC63BXD JT100FCVD
Type Hermetically sealed swing
compressor
Hermetically sealed scroll compressor
Crankcase heater 33 W
Motor output 1800 W 2200 W
Speed
Heat exchanger
Length 866 mm 857 mm
No. of rows 2
Fin pitch 2.00 mm
No. of passes 5 10
Face area 0.648 m² 1.131 m²
No. of stages 34 60
Tube type Hi-XSS(8)
Fin type Non-symmetric waffle louvre
Fin treatment Anti-corrosion treatment (PE)
Empty tubeplate hole 0
Fan
Type Propeller
Discharge direction Horizontal
No. of fans 1 2
Nominal air flow rate (230 V) cooling 54.50 m³/min 103.00 m³/min 99.00 m³/min
Nominal air flow rate (230 V) heating 48.10 m³/min 101.00 m³/min 100.00 m³/min
Fan motor model KFD-325-70-8A
Fan speed (nominal at 230 V) No. of steps 8
Fan speed (nominal at 230 V) cooling 813 rpm 802 rpm 772 rpm
Fan speed (nominal at 230 V) heating 721 rpm 787 rpm 779 rpm
Drive direct drive
Refrigerant circuit
Type R410A
Charge 3.20 kg 4.30 kg
Control Expansion valve (electronic type)
No. of circuits 1
Safety and functional devices High pressure switch
Fan motor thermal protector
Fuse
Heat insulation Both liquid and gas pipe
Weight Machine weight 61 kg 106 kg
Gross weight 65 kg 111 kg
RZQ - Final.book Page 44 Monday, September 20, 2004 11:24 AM