Service manual

General Outline: Indoor Units ESIE04-01

1–34 Part 1 – System Outline

2.13 FUQ71BUV1B

Outlook and

dimensions

The illustration below shows the outlook and the dimensions of the unit (mm).

Suspension bolt

Suspension position

Drain

connection

location for

upper piping

*Drain pipe can

be raised up to 350mm from the top surface of the product.

*When closing the

discharge grill, the

required space is 30mm

or more. (Note 3)

or more*

NOTES:

1. Location for manufacture’s label: on bell mouth.

2. This is where the signal of wireless remote controller is received.

Refer to the drawing of wireless remote controller in detail.

3. When closing the discharge grill (2 or 3 way discharge), direction of

pipe connecion will be limited, please refer to Installation manual.)

or more*

Height of suspension bracket

or more

(Required space)

Drain

connection

location for rear

piping

Required space

Brand name plate ( Note 2)

RZQ - Final.book Page 34 Monday, September 20, 2004 11:24 AM