Specifications

SiBE04-624 Indoor Unit
Removal Procedure 249
1.11 Removal of the Swing Motor
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step Procedure Points
1. Remove the swing motor Preparation

Remove the electrical box
according to "Removal of
the Electrical Box".
1
There are 3 hooks for
the lead wire for swing
motor.
2
Cut the clamp with
nippers.
3
Undo the lead wire for
swing motor from the
hooks.
4
Loosen the 1 screw of
the swing motor for the
horizontal blades
(large). Loosen the 2
screws of the swing
motor for the horizontal
blades (small).

The connector for swing
motor is disconnectable.

The same swing motors are
used for both large and
small horizontal blades.
2. Remove the swing motor
for vertical blades

Working without removing
the drain hose is possible.
1
Loosen the 1 screw of
the drain hose.
2
Loosen the 2 screws of
the assembly of swing
motor.