Specifications

Indoor Unit SiBE04-624
244 Removal Procedure
1.8 Removal of the Dehumidifying Solenoid Valve Coil
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step Procedure Points
1
Detach the lead wire
from the drip proof
cover.
Preparation

Remove the front grille
according to "Removal of
the Front Grille".
2
Disconnect the
connector for
dehumidifying solenoid
valve [S43].
3
Pull the dehumidifying
solenoid valve coil to
remove.

Solenoid valve does not
need screws.