Specifications

SiBE04-624 Indoor Unit
Removal Procedure 241
6
Names of parts of the
control PCB.
[S1]: Fan motor [S43]: Solenoid valve
[S21]: HA [S46]: to Display PCB
[S32]: Heat exchanger [S48]: to Sensor PCB
thermistor [S51]: Open/close
[S41]: Swing motor mechanism
[S52]: Streamer unit
4. Remove the sensor PCB
1
Undo the 1 hook and
pull out the sensor
PCB.
5. Remove the receiver PCB
1
The arrangement of the
wire harnesses.
2
Detach the fixing tape
and disconnect the
connector.
Step Procedure Points