Specifications

SiBE04-624 Indoor Unit
Removal Procedure 239
2. Remove the power supply
terminal board
1
Loosen the 1 screw
and pull out the
terminal board
sideward.
2
Disconnect the red
terminal with pliers and
black and white
terminals with a flat
screwdrivers on the
terminal board.
Black...... (1) Power supply
White ..... (2) Power supply
Red........ (3) Signal
3. Remove the control PCB

Clamps should be used all
the time.
Fix it as it was before.
1
Cut the 3 clamps.
2
Undo the earth wire
from the hook.
Step Procedure Points