Series Installation Manual
Table Of Contents
- Warnings, environmental policy, and certifications
- System description
- Description, installation and connection of the components
- Initial configuration
- Advanced configuration
- User settings – Wired Thermostat
- Zone settings
- Commissioning steps
- Exception codes
- Auto diagnostics
- Navigation guide
- Troubleshooting
- Wiring diagram
- Página en blanco
22
Installation Manual
Rev. 2.00 Date 01-2019
Device ID and Port
In the BACnet menu, press the icon . For the proper identification
on the BACnet/IP network and operation of the DZK BACnet
Interface, it may be required to modify the Device ID (by default
1000) and the Port parameter (by default 47808). These properties
can only be modified locally from the Main Wired Thermostat.
IP Configuration
In the BACnet menu, press the icon . For the proper operation
of the DZK BACnet Interface with the IP network, it is required to
configure the following network parameters:
- IP Address (default 192.168.0.100)
- Subnet mask (default 255.255.255.0)
- Gateway IP (default 192.168.0.1)
These properties can only be modified locally from the Main
Wired Thermostat.
To configure them, access the IP Configuration menu from the
BACnet menu:
Note: device ID is unique per
BACnet device.