Installation Manual

ASSEMBLY
REPLACING BATTERIES
FUNCTIONALITIES CONNECTION
SELF-DIAGNOSIS
Note: Refer to the DZK installation manual for troubleshooting steps.
Nº
Significado
Acción
1
xxx
xxxxx
We recommend the use of top-brand
batteries. Using low-quality batteries may
reduce the duration of use.
2
1
2
h= 5 ft
Press SW1button in the DZK Main Control Board, LED
will turn on (solid red). Select the zone number by
activating the corresponding microswitch.
Meaning
Blinking green 5 times Correct association
Blinking red once
Occupied zone
Blinking red twice
Thermostat out of range
Nº
Meaning
1
If the LED is fixed, the zone
is activated
This button also indicates the operation mode
of the system:
- Purple: Stop user mode
- Red: Heat mode
- Blue: Cool or Dry mode
- Green: Set-point
If the LED is blinking the
zone is deactivated
2
If the LED is on, it indicates there is a temperature gap between the set-
point temperature and the base temperature: 1 led = ±2ºF/1ºC (default
value) or ± 1ºF/0.5ºC, configurable trough Main Wired Thermostat
If the LED is blinking, it indicates it has reached the temperature limit set by
the User mode
Note: The base temperature must be set using any Wired thermostat (refer to User manual).
Meaning
Blinking red quickly
Error of communication with DZK Main Control
Board