Specifications

Control Devices EDUS391000-C

28 Controls

[Registration]

1. Pressing the "TIMER No." button causes the number set for timer number 1 to blink.

If no timer setting has been made " " will be displayed. Select the desired timer number by pressing the

"TIMER NO." button.

2. Once the desired timer number is displayed, press the "SET" button.

Press the "SET" button within 10 seconds after the timer number is displayed.

The display will return to how it was after 10 seconds.

The display for timer number 1 will stop blinking and then timer number 2 will start blinking.

3. Select the desired timer number by pressing the "TIMER NO." button.

Once the desired timer number is displayed, press the "SET" button.

The display for timer number 2 will stop blinking.

The " " display will disappear after 3 seconds.

Select " " in the timer number when you do not wish to set a timer number.

It is possible to set only one timer number.

(The times for turning the unit(s) on and off twice a day can be set with a single timer number.)

 Timer number setting

Group control: select the unit in the individual screen and set the timer number.

Batch control: set the timer numbers for all connected units.

Zone control: set the timer numbers for all zone-registered units.

Call up the zones which you wish to set in the zone screen and set the timer numbers.

 Since the timer number will be set to after-press priority, the timer number in the last screen set will be

valid for the connected units.

Example 1

Setting timer number 1 for unit 1-00 to "1" and timer number 2 to "2" in the individual screen and then setting timer

number 1 to "3" and timer number 2 to "4" in the batch screen causes the timer numbers for all units to be set, so

timer number 1 for unit 1-00 will be "3" and timer number 2 will be "4".

Example 2

To prevent leaving units on, timer number 1 is set to "5" in the batch screen.

Setting timer number 1 in zone number 1 to " " in the zone screen after that will change the timer number for zone

number 1, so the setting to prevent leaving the units on will be lost for zone number 1 only.

If a timer number is set incorrectly by accident, redo the setting in the desired screen.

 What happens when the timer number on time and off time are set to the same time

When the on time and off time are set to the same time for the same timer number, operation does not change.

When the on time and off time are set to the same time for different timer numbers, the off time is given priority.

When using timer operation, make sure the times do not overlap when setting the program of the schedule timer.