Operation Manual

Care and Cleaning

CAUTION

• Do not touch the aluminium ns by bare hand at the time of dismounting or mounting the lter.

1. Pull out the air lters.

• Open the front panel.

• Push the lter tab at the center of each air lter

a little upwards, then pull it down.

2) Pull down

1) Push

2. Wash the air lters with

water or clean them with

vacuum cleaner.

• Be sure to remove the titanium apatite

photocatalytic air-purifying lter. Refer to titanium

apatite photocatalytic air-purifying lter on the

next page.

• It is recommended to clean the air lters every

2 weeks.

If the dust does not come off easily

• Wash the air lters with neutral detergent thinned with

lukewarm water, then dry them up in the shade.

3. Set the lters as they were

and close the front panel.

• Press the front panel at both sides and the

center.

■

Air lter