Specifications
2019
Outdoor
unit
Indoor unit
Forced OFF
input
Remote controller
Remote controller
Remote controller
Remote controller
Remote controller
Remote controller
Remote
controller
Remote
controller
HRV
The indoor unit can be connected by the two
remote controller, for example one in the room
and the other one in the control room, which
can control the operation of indoor unit freely.
(The last command has a priority.) Of course,
the group control by two remote controller is
also possible.
Control by two remote controller
The system can be expanded to add
several controllers, such as BMS, Forced
OFF input and etc.
Expansion of system control
In all the series of VRV, Cool/Heat changeover in the same refrigerant
circuit can be changed by the remote controller of the indoor unit.
Control of Cool/Heat
changeover
One remote controller can
control the operation of max.16
indoor units at the same time.
Group control
Equipment
related to the
central control
1 2 3
The wiring of remote controller can be
extended to max.500m and it is possible to
install the remote controllers for the
different indoor units in one place.
Remote control
The operation of HRV can be controlled by
the remote controller of the indoor unit. Of
course, the remote controller can display
the time to clean the filter.
Control for the combined operation
4
4
3
2
1
Large liquid crystal screen displays
complete operating status.
Digital display lets you set
temperature in 1°C units.
Lets you individually program by
timer the respective times for
operation start and stop within a
maximum of 72 hours.
Equipped with a thermostat sensor in
the remote controller that makes
possible more comfortable room
temperature control.
Monitors room temperature and
preset temperature by
microcomputer, and can select
cool/heat operation mode
automatically. (VRV System Heat
Recovery series only)
Enables you to select cool/heat/fan
operation mode with the indoor
remote controller of your choice
without using the cool/heat selector.
(VRV Inverter series, Heat Recovery
series, PLUS series)
Constantly monitors malfunctions in
the system for 80 items, and is
equipped with a "self-diagnosis
function" that lets you know by
message immediately when a
malfunction occurs.
Lets you carry out various field
settings by remote controller.
Wired remote controller (Optional)
Set back time clock (Optional)
Wired remote controller
Set back time clock
The same operation modes and settings as with wired remote controllers are possible.
A compact light receiving unit to be mounted into a wall or ceiling is included.
• A light receiving unit for a ceiling-mounted cassette (double-flow, multi-flow and 600
x 600 multi-flow) type, ceiling-suspended type and wall-mounted type is mounted
into the indoor unit.
The remote controller has
centralized its frequently used
operation selectors and
switches (on/off, operation
mode, temperature setting and
airflow volume), making itself
suitable for use in hotel rooms
or conference rooms.
Signal receiving unit
(Separate type)
Wireless remote
controller
The concealed-type remote controller smartly fits into a
night table or console panel in a hotel room.
Exposed type
Concealed type
(For hotel use)
Wireless remote controller (Optional)
Simple remote controller (Optional)
Signal receiving unit
(Installed type)
Signal receiving unit can be
installed on the panel
ex. 600 x 600 multi-flow type
Connected to LCD wired remote controller(BRC type), this time clock can set 2 sets
of on/off times in an increment of 30 minutes within a day. For each on/off setting a
temperature setting is also possible.
Wide variation of remote controllers for indoor units
Wired remote controller
Set back time clock *
Wireless remote controller
(Installed signal receiving unit)
Wireless remote controller
(Separate type signal receiving unit)
Simple remote controller
(Exposed type)
Simple remote controller
(Concealed type: for Hotel use)
FXCQ FXFQ FXKQ FXSQ FXMQ FXHQFXZQ FXAQ FXL
(
N
)
Q
Individual Control Systems
: http://splitoff.ru/tehn-doc.html