Engineering
Table Of Contents
- Cover
- Table of Contents
- 1. Specifications
- 2. Dimensions
- 3. Restrictions
- 4. Operation Manual
- 5. Installation Manual
- 5.1 Safety Considerations
- 5.2 Accessories
- 5.3 Remote Controller Installation Procedure
- 5.4 Functions and Menu Items of Remote Controller Buttons
- 5.5 Power-on
- 5.6 Field Settings
- 5.7 Test Operation
- 5.8 Procedure for Checking Error History
- 5.9 Adding Maintenance Contact Information
- 5.10 Confirming Registered Details
- 5.11 Clock & Calendar
- 5.12 Language
Operation Manual EDUS721438
18 BRC1E73
3P243520-7N
14 English
Basic Operation
4
On/Off
When Ɣ On/Off button is pressed again,
the system will stop operating and the
Operation lamp will turn off.
Note
To prevent condensation water damage or system failure, do not Ɣ
shut off the power supply to the indoor unit immediately after
operation. Wait at least fi ve minutes for the condensate pump to
fi nish draining residual water from the indoor unit.
Characteristic of Dry mode
The Dry mode dehumidifi es the space at reduced cooling capacity to
prevent the room temperature from dropping to an uncomfortable
level.
Setback
The Setback function can be used to maintain the space temperature in an assigned range for an
unoccupied period.
Note
When enabled, the Setback mode becomes active when the indoor unit is turned off by either Ɣ
the user, a schedule event or an off timer.
This function is not available by default. It can be enabled by the system installer. Ɣ
01_EN_3P243520-7N.indd 14 11/27/2014 10:34:38 AM