Specifications
Installation Manual ED72-975
42 BRC1E61
7.4 Functions and menu items of remote controller buttons
3P243521-1
10 English
Functions and menu items of remote 4.
controller buttons
Functions and menu items4-1
Operation mode selector button(1)
Used to change the mode.
Fan speed control button(2)
Used to change the fan control.
Menu/Enter button(3)
Used to indicate the main menu. Ɣ
(For details of main menu, see the
operation manual.)
Used to enter the setting item selected. Ɣ
Main menu
Set temp mode changeover
Airfl ow Direction
Quick Cool/Heat On/Off
Ventilation
Timer setting
Service Contact/Model Info
Convenient functions
Setting status list
Clock setting
Language changeover
∗Depending on connected model
Up button (4)
Used to raise the set temperature. Ɣ
The next items on the upper side will be Ɣ
highlighted.
(The highlighted items will be scrolled
continuously when the button is kept
pressed.)
Used to change the item selected. Ɣ
Down button (5)
Used to lower the set temperature. Ɣ
The next items on the lower side will be Ɣ
highlighted.
(The highlighted items will be scrolled
continuously when the button is kept
pressed.)
Used to change the item selected. Ɣ
Right button (6)
Used to highlight the next items on the Ɣ
right-hand side.
Display contents are changed to next Ɣ
screen per page.
(1) Operation mode selector button
(11) LCD (with backlight)
(4) Up button
(5) Down button
(6) Right button
(7) Left button
(9) Operation lamp
(8) On/Off button
(10) Cancel button
(2) Fan speed control button
(3) Menu/Enter button
01_EN_3P243521-1.indd 10 2/3/2009 1:19:19 PM
English 9
Switch box
(field supply)
(Use optional accessory
KJB111A)
Small screws (M4×16)
Switch box for one unit
(with no cover)
84
28
(Installation pitch)
Ɣ Select fl at place for installation face as possible.
And, do not tighten the installation screws too much not to deform the lower case. Ɣ
CAUTION
Install the upper case as original condition. 3-7
Align the upper case with tabs of the lower case (6 points), inset and install the upper case. Ɣ
Install the wiring with care to prevent the pinch. Ɣ
Peel off a protective seal which is attached on the upper case. Ɣ
01_EN_3P243521-1.indd 9 2/3/2009 1:19:19 PM