Specifications
Operation Manual ED72-975
28 BRC1E61
3P243520-1
English 37
4
Return Setting
Monday
Schedule timer
Time Operation
06
:
00 22°C
––:–– –
––:–– –
––:–– –
––:–– –
Press Ɣ buttons to move the
highlighted item and press
buttons
to select the desired operation.
The following three types of operations are
available.
switch on the installation at a scheduled time, *1.
in combination with a set point (exact
temperature control)
switch on the installation at a scheduled time, *2.
in limit operation
switch off the installation (end of control)*3.
The status remain unchanged in the case of “–”.*
The display changes in sequence as shown below
when
buttons are pressed.
— 22°C 20°C-26°C OFF
*2*1**3
To make an operation change at set Ɣ
temperature, press
buttons to move
the highlighted item and press
buttons to set the operation to 22°C .
Return Setting
Monday
Schedule timer
Time Operation
06
:
00 22°C
––:–– –
––:–– –
––:–– –
––:–– –
Return Setting
Monday
Schedule timer
Time Operation
06
:
00 28°C
––:–– –
––:–– –
––:–– –
––:–– –
Return Setting
Monday
Schedule timer
Time Operation
06
:
00 28°C
––:–– –
––:–– –
––:–– –
––:–– –
To change the set temperature, press Ɣ
the Menu/Enter button so that the set
temperature will be highlighted and
ready to be changed.
Press Ɣ
buttons to change the set
temperature.
The set temperature will increase by 1°C
when the
button is pressed and
decrease by 1°C when the
button is
pressed.
Pressing Menu/Enter button enters the Ɣ
set temperature change.
01_EN_3P243520-1.indd 37 2/6/2009 5:50:07 PM
36 English
Schedule timer
Condition setting
Operation Method
1
Return Setting
Schedule timer
Enable/Disable setting
Condition setting
Holiday setting
2/2
Display the schedule timer settings Ɣ
screen.
(See page 35.)
Press Ɣ buttons to select
Condition setting on the schedule timer
settings screen.
Press Menu/Enter button to display the
condition setting screen.
2
Return Setting
Sunday
Time Operation
––:–– –
––:–– –
––:–– –
––:–– –
––:–– –
Schedule timer
Press Ɣ buttons to select the day to
be set on the condition setting screen.
Input the program for the selected day Ɣ
next.
The schedule timer can accept a maximum of
5 operations per day.
3
Return Setting
Monday
Schedule timer
Time Operation
06
:
00
–
––:–– –
––:–– –
––:–– –
––:–– –
Return Setting
Monday
Schedule timer
Time Operation
06
:
00
–
––:–– –
––:–– –
––:–– –
––:–– –
Press Ɣ buttons to move the
highlighted item and press
buttons
to input the desired operation start time.
Each press of
buttons moves the
numbers by 1 hour or 1 minute.
Holding down the button causes the
number to change continuously.
Menu Manipulation
01_EN_3P243520-1.indd 36 2/6/2009 5:50:07 PM