Technical data
• Sky Air • Intelligent Manager
71
•
3
5
4
4 Accessories
4 - 1 DEC101A51 - Digital input
4 - 1 - 1 Dimensional drawing
Item Comments
INTERFACE ADAPTERS KRP928B2S For connection to Split units
DTA102A52 For connection to R-22/R-407C Sky Air units
DTA112B51 For connection to R-410A Sky Air units
DIII AI DAM101A51 Outdoor temperature sensor
DIGITAL INPUT DEC101A51 Input contacts: 8 points with additional error feedback
DIGITAL INPUT/OUTPUT DEC102A51 Output contacts: 4 points with additional error and ON/OFF feedback
SOFTWARE DAM002A51 Power Proportional Distribution
DAM003A51 ECO Mode
DAM004A51 Web Access Function
DEC101A51
3D047630
Mounting hole (*1)
(198)
(309)
325
335
70 70
70
C 1
6
4.5
40 40 40
80 40
325
UP
Spare hole (*1)
Mounting hole (*1)
Service entrance - wire lead-in port
(Approx. 10mm dia. x 6)
Fix the DEC101A51 firmly with the
installation screws (M4)
Spare hole (*1)
Front panel screw
DEC101A51
DEC101A51 DEC101A51
DEC101A51 DEC101A51
70
140
NOTES
1 Installation place
• Install the unit indoors where it is not exposed to
water and dust or dirt.
• Install the unit where both temperature and humidity
do not become high.
(Operating (available) temperature: -10~+40
°
C
Operating (available) humidity: 10~85%)
• Connect the wiring to be connected in the field from
the lower surface side.
It is, therefore, necessary to make arrangements so
as not to attach other equipment within 80mm from
the lower surface of this equipment.
• Install this equipment in a place in which only
authorized personnel can touch it.
2 Installation Direction
Install this equipment vertically to the floor surface. It
should be noted that if it is installed in horizontal direction,
a malfunction or failure may result.
3 Installation Method
Ensure that this equipment is installed with 4 screws
(screw size M4 min.).
4 Restrictions in continuous installation
In case several devices are set up and installation inside
the power board is carried out, each equipment installation
space and space between the wall surface and this
equipment should be left at least as shown to the left.
Power supply specifications 1~200-240V 50/60Hz
Rated power consumption 15W
Mass (Weight) 2.5kg
Case material Plated steel sheet
Case color Matting chrome