Technical data

• Sky Air • Control Systems
5
• Individual control systems
1
1
1 Possible individual control systems
BRC1E51A
Wired remote control - BRC1E51A/B
User-friendly remote control with contemporary design
A series of energy saving functions that can be individually selected.
• Temperature range limit
• Setback function
• Presence & floor sensor connection (available on new round flow cassette)
• kWh indication
• Set temperature auto reset
• Off-timer
Temperature range limit avoids excessive heating or cooling.
Save energy by constraining the lower temperature limit in cooling and upper temperature limit in heating mode.
note: also available in auto cooling/heating change over mode.
kWh indication keeps track of your consumption.
The kWh indication shows an indicative electricity consumption of the last day/month/year.
Other functions:
• Up to 3 independent schedules can be set, so the user can easily change the schedule himself throughout the year
(e.g. Summer, winter, mid-season)
• Possibility to individually restrict menu functions
• Easy to use: all main functions directly accessible
• Easy setup: clear graphical user interface for advanced menu settings
• Real time clock with auto update to daylight saving time
• Supports multiple languages (English,German,Dutch,Spanish,Italian,Portuguese,French,Greek,Russian,Turkish,
Polish (NEW))
• Built-in backup power: when a power failure occurs all settings remain stored up to 48 hours
BRC1D52
Wired remote control - BRC1D52
• Schedule timer:
–Five day actions can be set as follows:
* set point: unit is switched ON and normal operation is maintained
* OFF: unit is switched OFF
* limits: unit is switched ON and min./max. control (cf.limit operation for more details)
• Home leave (frost protection): during absence, the indoor temperature can be maintained at a certain level. This
function can also switch the unit ON/OFF
• User friendly HRV function, thanks to the introduction of a button for ventilation mode and fan speed
• Constantly monitoring of the system for malfunctions in a total of 80 components
• Immediate display of fault location and condition
• Reduction of maintenance time and costs
Display
• Operating mode
• Heat Recovery Ventilation (HRV) in operation
• Cool / heat changeover control
• Centralised control indication
• Group control indication
• Set temperature
• Air flow direction
• Programmed time
• Inspection test / operation
• Fan speed
• Clean air filter
• Defrost / hot start
• Malfunction