Technical data

• Sky Air • Control Systems
19
• Individual control systems
1
5
5 BRC1D52 - Wired remote control
5 - 2 Explanation of buttons and functions
1
ON/OFF BUTTON ‘ ’
13
MNIIMUM SET TEMPERATURE ‘ ‘
Press the ON/OFF button to start or stop the system. The minimum set temperature indicates the minimum set temperature when in
limit operation.
2
OPERATION LAMP ‘ ’
14
SCHEDULE TIMER ICON ‘ ‘
The operation lamp lights up during operation or blinks if a malfunction occurs. This icon indicates that the schedule timer is enabled.
3
OPERATION MODE ICON ‘ ’ ‘ ’ ‘ ’ ‘ ’ ‘ ’
15
ACTION ICONS ‘ ‘
These icons indicate the current operation mode (FAN, DRY, AUTOMATIC,
COOLING, HEATING).
These icons indicate the actions for each day of the schedule timer.
4
VENTILATION MODE ICON ‘ ’,’ ’,’ ’
16
OFF ICON ‘ ‘
These icons indicate the current ventilation mode (HRV only) (AUTOMATIC,
HEAT EXCHANGE, BYPASS).
This icon indicates that the OFF action is selected when programming the
schedule timer.
5
VENTILATION ICON‘ ’
17
INSPECTION REQUIRED ‘ ’ and ‘ ’
The ventilation icon appears when the ventilation is adjusted with the ventilation
amount button (HRV only).
Simultaneously, the ventilation amount is indicated by the fan speed icon (see 22).
These icons indicate that inspection is required. Consult your installer.
18
SET TEMPERATURE DISPLAY ‘ ’
6
AIR CLEANING ICON ‘ ’ This indicates the current set temperature of the installation (not shown in LIMIT
operation or in FAN or DRY mode).
This icon indicates that the air cleaning unit (option) is operational.
7
LEAVE HOME ICON‘ ’
19
SETTING ‘ ’
The leave home icon shows the status of the leave home function. Not used, for service purposes only.
20
AIR FLOW DIRECTION ICON ‘ ’
This icon indicates the air flow direction (only for installations with motorised air
flow flaps).
21
NOT AVAILABLE ‘ ’
8
EXTERNAL CONTROL ICON ‘ ’ This is displayed whenever a non-installed option is addressed or a function is not
available.
This icon indicates that another controller with higher priority is controlling or
disabling your installation.
22
FAN SPEED ICON ‘ ’
9
CHANGE-OVER UNDER CENTRALISED CONTROL ICON ‘ ‘ This icon indicates the set fan speed.
This icon indicates that the change-over of the installation is under centralised
control assigned to another indoor unit or optional cool/heat selector connected to
the outdoor unit (= master remote control).
23
DEFROST/HOTSTART MODE ICON ‘ ’
This icon indicates that the defrost/hotstart mode is active.
ON Leave home is enabled
FLASHING Leave home is active
OFF Leave home is disabled