Specifications

SiBE05-722_A Operation Manual
Operation Manual 55
13

•
Hold the knob and move the louvers.
(You will find a knob on the left side and the right side blades.)
Notes on flap and louvers angles.
•
•

ATTENTION
•
•
DRY
COOL
FAN
HEAT
To adjust the vertical blades
(louvers)
When adjusting the louver, use a robust and stable stool and
watch your steps carefully.
Unless [SWING] is selected, you should set the
flap at a near- horizontal angle in COOL or DRY
mode to obtain the best performance.
In COOL or DRY mode, if the flap is fixed at a
downward position, the flap automatically moves
in about 60 minutes to prevent condensation on it.
Always use a remote controller to adjust the flap
angle.
If you attempt to move it forcibly with hand when it
is swinging, the mechanism may be broken.
Be careful when adjusting the louvers. Inside the
air outlet, a fan is rotating at a high speed.