Specifications

9
3 / Monobloc
outdoor unit
3 / MONOBLOC OUTDOOR UNIT: ALL IN ONE
In addition to Daikin Altherma Split type systems,
Daikin has a monobloc version in which the hydrobox
components are located within the outdoor unit. In this
new system, the water pipes, rather than refrigerant
4 / SOLAR CONNECTION KIT
Averaged over an entire year, the sun delivers half of
the energy we need to bring our domestic water up to
the desired temperature for free. Your customer can
use this free solar energy by connecting a solar boiler to
his Daikin Altherma system. A solar boiler is a thermal
solar-energy system whereby solar rays are transformed
into heat. The heat is then stored in a water supply tank.
4A / SOLAR COLLECTOR PANEL (FIELD SUPPLY)
The high-efficiency collectors transfer all the short-
wave solar radiation into heat as a result of their highly
selective coating. The collectors can be mounted on the
roof tiles.
lines, run indoors from the outdoor unit, making
installation much quicker and easier for the installer.
6
4B / SOLAR PUMP STATION (FIELD SUPPLY)
Typical pump stations are equipped with safety valve,
pressure gauge and connection for expansion vessel,
and flow and return temperature indication. A digital
temperature difference controller with plain text is also
included. The Solar yield (kWh) is measured by a sensor.
Pump speed is controlled by the solar intensity to ensure
maximum efficiency. The heat pump is disabled during
solar heating as solar energy gets the first priority, which
ensures system protection and maximum efficiency.
4B / Solar pump station
(field supply)
4A / Solar collector
(field supply)
6 / ROOM THERMOSTAT
With the wired room thermostat, the ideal temperature
can be easily, quickly and conveniently regulated.
5 / Hydronic
Fan Coil Unit
(option)
5 / HYDRONIC FAN COIL UNIT (OPTION)
For Hydro-Air or traditional forced air applications,
the high efficiency hydronic fan coil unit can be
used to meet your comfort needs.