Specifications

29
™
Control customized to your customer
The water temperature changes in function with the
outside temperature so that your customer can enjoy
a stable level of heating at any time. As the installer,
you set up the system according to the desires of your
customer. You input four temperatures to determine
the “heating curve” and in doing so, you perfectly
tune the Daikin Altherma
system to the type of home.
Automatic re-start after power interruption
In the event of a power interruption of up to two
hours, the system automatically resumes with the
previously set parameters.
Quiet operation
The outdoor unit makes hardly any noise thereby
leaving your customer’s (and the neighbor’s) peace and
quiet undisturbed. You can even set the outdoor unit
to produce 10dB(A) less noise during the night.
Electric back-up heating
Every Daikin Altherma
system is equipped with a back-
up heater (heating capacity of 3 or 6 kW). This unit can
be used for supplemental heating during extremely cold
outdoor temperatures or as a back-up in case of any
problems with the outdoor unit. Your customer can
then enjoy comfortable heating at any moment.
The operation of the back-up heater can be coupled to
the outside temperature. The back-up heater will then
only operate when outside temperatures are extremely
low.
DID YOU KNOW…
with a Daikin Altherma
TM
heat pump,
the temperature of the domestic
water can go up to 185°F (85°C),
the temperature of the hot water for
heating ranges between 59°F (15°C)
and 131°F (55°C) and the temperature
of the cold water for cooling between
41°F (5°C) and 72°F (22.2°C).
UNIQUE BENEFITS