Specifications

Thermistor （Compatible with all types of Oil Cooling Unit 9 series）
ＡＫＺ 9-OP-K5
5m
ＡＫＺ 9-OP-Y10
10m
ＡＫＺ 9-OP-Y5
5m
ＡＫＺ 9-OP-A10
10m
ＡＫＺ 9-OP-A5
5m
ＡＫＺ 9-OP-K10
10m
ＡＫＺ 9-OP-K15
15m
AKZ 9-OP-K
AKZ 9-OP-Y
AKZ 9-OP-A
27.5
80
（φ5 ）
（φ4.5）
R1/8
φ1.1
（φ4.5）
25
80
φ8
R1/8
（φ4.5）
27.5
80
SXH-001T-0.6
（φ5 ）
φ1.1
19
Optional part
Thermistor
Optional
part
■Thermistor models and applications
Model Name
Length of
lead wire
L（m）
Application
（To be installed）
by you
Applicable
model
Shape
Machine temperature synchronous thermistor
Thermistor for
oil temperature control
（ ）
（ ）
（ ）
For machine
temperature
synchronous
control
Implanted in
the main
machine body
For machine
temperature
synchronous
control
Attached to the
surface of main
machine body
For return oil
temperature
control
Installed in oil
tube of the
main machine
AKZ 9
Series
XHP-3（Blue）
Lead wire
Lead wire
Lead wire
Thermistor characteristics: Resistance value … R25 （Resistance value at 25℃） ＝ 20kΩ, Tolerance: ±3%
When this optional part is installed in the oil piping of the main machine,
the thermistor detects the temperature to allow the control of oil temperature.
■Instruction for installation and connection
Rc 1/8
Screw seat
Oil tube
Keep this part in close contact with the
main body and cover the part with putty.
Connect to Oil Cooling Unit control board connector CN11.
Please prepare the band and mounting screws yourself.
Connect to Oil Cooling Unit x 2M
Terminal box Nos. 30 and 31.
（Main machine body）
Replace this part with the oil outlet thermistor and operate
in the outlet oil temperature control mode Nos. 1, 5 and 6.
Connect to Oil Cooling Unit x 2M
Terminal box Nos. 30 and 31.
Rc 1/8
（To be machined on the main machine side）
Drill holeφ8, 20 or more in depth
Fill the hollow portion with silicon grease.
Recommended grease: Heat dissipating grease No. KS609
made by Shin-Etsu Chemical Co., Ltd.
Main
（
machine
）
body
Plug-in terminal
Plug-in terminal