Use and Care Manual

ManualsBrandsDAICH ManualsExterior PaintSpreadRock Granite Stone Coating 3-gal Sandstone Interior/Exterior

SpreadRock® is a colorful blend of pre-mixed stone granules and DAICH Coatings’ proprietary acrylic

technology, formulated to

spread smoothly onto interior or exterior concrete, masonry, brick, wood and more,

with outstanding results.

SpreadRock’s stone matrix naturally creates the look of speckled granite while producing a slip resistant, super–

hard surface with outstanding adhesion and flexibility plus excellent resistance to salt, ultraviolet light, and freeze/

thaw cycles.

SpreadRock’s colorful stone mix provides an extremely hard

surface that is highly resistant to abrasion and impact. Its

specialized bonding technology delivers superior elasticity,

adhesion and low water absorption. It also exhibits excellent

resistance to UV-related embrittlement and discoloration to

assure long life, durability and performance.

It’s also breathable to permit the normal transmission of

moisture vapor through the coating to assist in protecting

against trapped moisture in the slab. Low water absorption

protects against rain and snow.

DESCRIPTION:

Pre-mixed, non-cementitious stone matrix coating for interior/exterior ﬂ oor and wall surfaces.

USES:

Designed for use on stationary exterior concrete, masonry, prepared tile, and wood surfaces, styrofoam

and wall board. For interior applications over concrete, masonry, drywall, tile, wood, vinyl, linoleum,

laminates.

BENEFITS:

• protects concrete and other underlying surfaces

• comes completely pre-mixed and ready to apply – no messy blending, broadcasting or measuring.

• simple 3-step application.

• adds variable slip resistance to walking surfaces

• very high abrasion and impact resistance

• water-based, user friendly and environmentally safe with very low vocs

• resists the growth of mold, mildew, algae and other bacterials.

• easily applied by scraper, drywall spatula, trowel, squeegee and texture spray equipment.

PACKAGING: SpreadRock® is available in: 1-gallon, 3-gallon and 5-gallon containers.

COVERAGE: Up to 60 sq.ft. (27 m

) per gallon. Varies with substrate conditions and application

thickness.

PERFORMANCE FEATURES

• freeze/thaw resistance

• UV resistant

• breathability

• low shrinkage

• colorfast

• ﬂ exible

• pre–mixed

• abrasion/impact resistant

• numerous colors

• easy maintenance

• crack resistant

• alkali resistant

• high resistance to salt

Summary of content (3 pages)

PAGE 1
SpreadRock® is a colorful blend of pre-mixed stone granules and DAICH Coatings’ proprietary acrylic technology, formulated to spread smoothly onto interior or exterior concrete, masonry, brick, wood and more, with outstanding results. SpreadRock’s stone matrix naturally creates the look of speckled granite while producing a slip resistant, super– hard surface with outstanding adhesion and flexibility plus excellent resistance to salt, ultraviolet light, and freeze/ thaw cycles.
PAGE 2
BEFORE AFTER COLOR SELECTION: SpreadRock® is available in five standard colors. For larger custom projects Daich Coatings can also prepare specially tinted orders upon request. Brownstone Flint Grey Santa Fe Sand Plumstone SURFACE PREPARATION: Surface must be structurally sound, clean, dry and free from spalling, efflorescence, dust, dirt, oils, surface flaking, poorly bonded or glossy paint, sealers, salts and other contaminates which may effect adhesion and product performance.
PAGE 3
CURE TIME: Dry to touch in 60 minutes, depending on atmospheric conditions. Protect coated surfaces for 6-8 hours prior to exposure to rain or heavy condensation. Avoid foot traffic until the following day. In dry conditions product cure is complete in 24 hours. SEALING: Once fully cured for at least 24 hours (longer in damp or cool conditions that lengthen dry time), SpreadRock finishes must be sealed with DAICH Ultra Clear Coat Sealer or, for automotive surfaces, DAICH DaiHard Garage & Driveway Sealer.