Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description
1vv0300604, Rev. ISSUE#14 - 22/01/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 74 of 214
6.4.3.7 O - return to On Line Mode
O – return to on line mode
Execute command
ATO It is used return to On-line mode from command mode. If there's no
connection active returns ERROR.
Note: After the issue of this command, if the device is in conversation, to
send other commands to the device you must return to command mode by
issuing the escape sequence or lowering DTR if &D1 option is active.
Read command
Write command
Test command
Example
Reference V25ter.
SW release Version A
6.4.3.8 &G - guard tone
&G – guard tone
Execute command
AT&G It is has no effect is included only for backward compatibility with landline
modems.
Read command
Write command
Test command
Example
Reference
SW release Version A