Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description

1vv0300604, Rev. ISSUE#14 - 22/01/04

5 Service and firmware update

The serial cable used for the communication with a PC can be also used to update the Telit GM862-

GPRS module firmware. The RS232 connector DB type 9 pin 90° is used to connect the Telit

GM862/S1 Evaluation Kit. to any DTE .

All levels are conformed to RS232 and V.24 standard and a PC serial port can be directly connected

to this connector.

The firmware update can be done with a specific software tool provided by Telit that runs on

windows based PCs.

5.1.1.1 Step-by-Step upgrade procedure

I. Download the specific software for upgrading (Transfer Flash Image

GM862_PCS_xxx.zip).from the site www.gm862.com, or request it at this e-mail address

ts-gm862@telit.net

II. Unzip the file GM862_PCS_xxx.zip. A new exe file will be created.

III. Mount the Telit GM862-PCS module in the Evaluation Kit and supply power. Do not turn on

the module for now.

IV. Run the file TFI_GM862-PCS_xxxx.exe. The following window should be displayed, Select

the language preferred by pressing the correspondent button.

V. Press OK to the initial message.