Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description
1vv0300604, Rev. ISSUE#14 - 22/01/04
Reproduction forbidden without DAI Telecom written authorization – All Right reserved – Right of modification reserved page 203 of 214
7 Conformity Assessment Issues
The Telit GM862-PCS/-GPRS/-GSM modules are assessed to be conform to the R&TTE
Directive as stand-alone products, so If the module is installed in conformance with Dai Telecom installation
instructions require no further evaluation under Article 3.2 of the R&TTE Directive and do not require further
involvement of a R&TTE Directive Notified Body for the final product.
In all other cases, or if the manufacturer of the final product is in doubt then the equipment integrating the radio module
must be assessed against Article 3.2 of the R&TTE Directive.
In all cases assessment of the final product must be made against the Essential requirements of the
R&TTE Directive Articles 3.1(a) and (b), safety and EMC respectively, and any relevant Article 3.3
requirements.
The Telit GM862-PCS/-GPRS/-GSM modules are conform with the following European Union Directives:
¨ R&TTE Directive 1999/5/EC (Radio Equipment & Telecommunications Terminal Equipments)
¨ Low Voltage Directive 73/23/EEC and product safety
¨ Directive 89/336/EEC for conformity for EMC
In order to satisfy the essential requisite of the R&TTE 99/5/EC directive, the GM862PCS module is
compliant with the following standards:
• GSM (Radio Spectrum). Standard: EN 301 511 and 3GPP 51.010-1
• EMC (Electromagnetic Compatibility). Standards: EN 301 489-1 and EN 301 489-7
• LVD (Low Voltage Directive) Standards: EN 60 950
In this document and the Hardware User Guide, Software User Guide all the information you may need for
developing a product meeting the R&TTE Directive is included.
Furthermore the Telit GM862-PCS module is FCC Approved as module to be installed in other devices. This
device is to be used only for fixed and mobile applications. If the final product after integration is intended
for portable use, a new application and FCC is required.
The Telit GM862-PCS module is conform with the following US Directives:
¨ Use of RF Spectrum. Standards: FCC 47 Part 24 (GSM 1900)
¨ EMC (Electromagnetic Compatibility). Standards: FCC47 Part 15
To meet the FCC's RF exposure rules and regulations:
- The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20
cm from all the persons and must not be co-located or operating in conjunction with any other antenna
or transmitter.
- The antenna(s) used for this module must not exceed 7 dBi for mobile and fixed or mobile operating
configurations.
- Users and installers must be provided with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify
any regulatory questions and to have their complete product tested and approved for FCC
compliance.