Specifications

Telit GM862-PCS/-GPRS/-GSM Product Description

1vv0300604, Rev. ISSUE#14 - 22/01/04

6.10.2.5 #SEMAIL - Send Email

#SEMAIL - Send Email

Execute command

AT#SEMAIL =

"<da>","<subj>",<att>"

Sends an Email message .

Parameter:

<da> - destination address

<subj> - subject of the message

<att> - attach image flag

0 - don't attach any image

1 - attach the snapshot taken (must be already been taken…)

The device responds to the command with the prompt '>' and awaits

for the message body text.

To complete the operation send Ctrl-Z char (0x1A hexadecimal) , to

exit without writing the message send ESC char (0x1B hexadecimal).

If email message is successfully sent, then the response is OK.

If message sending fails for some reason, an error code is reported

Note: Care must be taken to ensure that during the command

execution, no other commands are issued.

To avoid malfunctions is suggested to wait for the OK or ERROR/

+CMS ERROR:<err> response before issuing further commands.

Note: sending a mail with an image attachment can take quite a long

time since it can be over 50Kb to send and can take over 1 minute.

Read command

Write command

Test command

Example AT#SEMAIL="me@myaddress.com","subject of the mail",1

Ø message body… this is the text of the mail message…

CTRL-Z

..wait..

Message has been sent.

Reference Telit specifications

SW release Version D