Dahua Panoramic + PTZ Network Camera Quick Start Guide Dahua Panoramic + PTZ Network Camera Quick Start Guide Version 1.0.0 ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
Dahua Panoramic + PTZ Network Camera Quick Start Guide Welcome Thank you for purchasing our network cameras. This user’s manual is designed to be a reference tool for using your product. Please read the following safeguards and warnings carefully before you use this series product. Please keep this user’s manual well for future reference. Important Safeguards and Warnings Electrical safety All installation and operation should conform to your local electrical safety codes.
Dahua Panoramic + PTZ Network Camera Quick Start Guide Do not dismantle the device because there is no component that can be fixed by users themselves. Otherwise, it might cause water leakage or bad image due to unprofessional dismantling. Please contact after-sale service to replace desiccant when it becomes green. It is recommended to use the device together with lightning arrester to improve lightning protection effect.
Dahua Panoramic + PTZ Network Camera Quick Start Guide The company is not liable for any loss caused by the operation that does not comply with the manual. If there is any uncertainty or controversy, please refer to our final explanation. Regulatory Information FCC Information 1.1 FCC conditions： This device complies with part 15 of the FCC Rules.
Dahua Panoramic + PTZ Network Camera Quick Start Guide Table of Contents 1 Product Overview .................................................................................................................................. 5 2 Device Structure .................................................................................................................................... 6 2.1 Device Cable ...................................................................................................................
Dahua Panoramic + PTZ Network Camera Quick Start Guide 1 Product Overview This series product is a type of integrated camera which consists of panoramic camera and tracking PTZ dome camera. It provides monitoring effect of both panoramic and partial details. Panoramic camera can provide realtime HD surveillance of 360°or 180°view coverage. Besides, it is convenient to recognize and exclude abnormity via quick positioning and zoom in of tracking PTZ dome camera when abnormity happens. Support H.265/H.
Dahua Panoramic + PTZ Network Camera Quick Start Guide 2 Device Structure 2.1 Device Cable Figure 2-1 2.
Dahua Panoramic + PTZ Network Camera Quick Start Guide Figure 2-3 7
Dahua Panoramic + PTZ Network Camera Quick Start Guide 3 Device Installation Note The following figure is for reference only, which is only used to know the device installation, please refer to the actual device for more details. The bracket installation wall needs to sustain at least 4x weight of the bracket and camera. Please cut off the device power when installing Micro SD card.
Dahua Panoramic + PTZ Network Camera Quick Start Guide Please implement the step when it needs to use Micro SD card for data storage. Find the Micro SD card installation slot in the location shown in Figure 3-2, adjust the direction of Micro SD card well and insert it into the slot and complete installation. Step 3 Step 4 Step 5 Step 6 Figure 3-2 Install back the device enclosure and use screwdriver to tighten it firmly and install the device decoration cover back in position.
Dahua Panoramic + PTZ Network Camera Quick Start Guide 2) 3) Connect the device cable to the external cable according to the use requirements, and use insulated rubber tape to twist the cable connection well to make it waterproof. Note Please be aware that the bending radius needs to be no less than 30mm when connecting to optical fiber.
Dahua Panoramic + PTZ Network Camera Quick Start Guide 4 Network Configuration The IP address of all the cameras is the same when leaving factory (default IP 192.168.1.108). To make the camera access to the network smoothly, please plan the available IP segment reasonably according to the actual network environment. 4.1 Modify IP Address The cameras which are accessed via wired network can acquire and modify the IP address through “Quick Configuration Tool”.
Dahua Panoramic + PTZ Network Camera Quick Start Guide Figure 4-2 Step 5 Set the mode as Static, and input the planned Start IP, Subnet Mask and Gateway. Note Set the mode as DHCP when there is DHCP server in the network, the device will automatically acquire IP address from the DHCP server. Step 6 Click OK to finish modification. 4.
Dahua Panoramic + PTZ Network Camera Quick Start Guide Note The default username and password is admin and admin respectively, please modify the administrator password as soon as possible after you successfully logged in. Step 3 Click Login and the system will display the WEB main interface, which is shown in 错误!未找到引用源。. Note Please install plug-in according to system prompt for the first login.
Dahua Panoramic + PTZ Network Camera Quick Start Guide 5 Smart Track Setup After enabling alarm track and setting calibration parameters, the tracking PTZ dome will auto activate to corresponding position and track the object until it is beyond the monitoring range when the intelligent rules of panoramic camera trigger alarm. Precondition The panoramic camera has set the intelligent rules of intrusion or tripwire. 5.
Dahua Panoramic + PTZ Network Camera Quick Start Guide Figure 5-2 Step 2 Select the lens number under the video image successively (as shown in Figure 5-3), then you can add calibration point for video image of corresponding lens. Figure 5-3 1) 2) 3) Click and click video image to display calibration box, drag the calibration box to proper location.
Dahua Panoramic + PTZ Network Camera Quick Start Guide ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. Address: No.1199, Bin'an Road, Binjiang District, Hangzhou, P.R. China Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email: overseas@dahuatech.com Website: www.dahuasecurity.
