Operation Manual


Figure 4-7
Step 2
It is to set day/night mode parameter, please refer to Table 4-6 for more details.
Parameter
Note
Mode
The camera image is displayed as color or Day&Night mode.
Note
"Mode" setting is not affected by the setting of "Config File".
Color: The camera image is displayed as color image.
Auto: The camera auto select to display color image or black & white image
according to the brightness of monitoring image.
Black & White: The camera image is displayed as black & white image.
Sensitivity
The parameter can be set when the "Mode" is set as "Auto".
It is the sensitivity of the switch between image color display and black & white
display.
Delay
The parameter can be set when the "Mode" is set as "Auto".
It is the delay time of switch between image color display and black & white
display.
Table 4-6
Step 3
Click "Save" to complete setting.
4.1.1.1.6 Zoom & Focus
Step 1
Click "Zoom Focus" and the system will display the interface of "Zoom Focus", which is shown in Figure
4-8.