Operation Manual


Parameter
Note
Video Standard
It is to display the video standard of the device, such as 50Hz.
Table 4-49
Step 3
Click "Save" to complete setting.
4.6.1.2 Date & Time
It is to set date format, time format, time zone, system time, enable DST or set NTP server.
Step 1
Select "Setup > System > General > Date&Time" and the system will displayt the interface of
'Date&Time", which is shown in Figure 4-95.

Figure 4-95
Step 2
It is to configure the parameters of date & time, please refer to Table 4-50 for more details.