Operation Manual



Figure 4-80
Step 2
Select "Enable" to enable alarm linkage.
Step 3
It is to set the parameters of alarm, please refer to Table 4-41 for more details.
Parameter
Function
Relay-in
It is to select external alarm device.
Working Period
It is to set the alarm period, it can enable alarm event only during the period
range which has been set.
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
 You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
 Click the "Setup" of corresponding week, select the check box in front of
the period on the bottom of the interface, and input time value, there are
six periods to be set every day.
3. Click “Save” to complete the setup of working period.