User Guide

24
Figure 5-3 Temperature monitoring
Step 2 Select the display mode of the channel.
●
Visual: It is selected by default.
●
Thermal: When the light is not good (such as with black light or the light is too dim), we
recommend you selecting
Thermal
.
●
Schedule: Select
Schedule
and then configure the schedule. The two channels will
switch automatically to the configured schedule.
Step 3 (Optional) Configure
Snap Angle Filter
.
●
1: The camera detects frontal faces only.
●
90: The camera detects side faces only. It is set by default.
Snap angle filter is only supported when you select
Visual
as the display mode of the
smart channel.
Step 4 Enable
Only Measure Forehead
as needed.
After enabling this function, the camera only detects the temperature of the forehead area.
It can reduce the false alarm caused by high temperatures in the background.
Step 5 Enable
Distance Detection
as needed.
It is enabled by default.
Step 6 Enable
Snap Face Image
as needed.
Step 7 Click
Save
.