User Guide
Table Of Contents
22
5.3 Configuring Temperature Monitoring
Thermal temperature monitoring is enabled. For details, see "5.2 Enabling Smart Plan".
Step 1 Select
Setting
>
Smart Thermal
>
Temp Monitoring
.
Step 2 Click
Draw Rule
to draw a detection area.
Make sure that the lower border of the detection area is close to the general height of
people's shoulders. The upper border can be next to the upper edge of the thermal image.
Step 3 Select the
Enable
check box. It is enabled by default.
Configure thermal temperature monitoring parameters.
Figure 5-2 Temperature monitoring