User Guide
Table Of Contents
21
5 Configuring Camera
With a thermal camera, the Detector supports temperature monitoring. The detection rules are set
by default, but you can change it to meet your preference. For details, see
Thermal Hybrid
Camera_Web Operation Manual
.
5.1 Logging in to Camera
Step 1 Open IE browser (IE7 and later), enter the IP address of the device (192.168.1.108 by
default) in the address bar and press the Enter key.
Step 2 Enter the username and password.
The username is admin by default.
Step 3 Click
Login
.
5.2 Enabling Smart Plan
Enable the smart plan before configuring thermal temperature monitoring.
Step 1 Select
Setting
>
Event
>
Smart Plan
.
Step 2 Enable thermal temperature monitoring.
Click to enable it, and the icon is highlighted.
Figure 5-1 Smart plan