User Guide

16
Step 1 Log in to the Detector. For details, see "4.3.1 Login".
Figure 4-4 Sensitivity setting
Step 2 Press or to move the cursor to
Sensitivity
, and then press to go to the
sensitivity setting interface.
Figure 4-5 Set sensitivity
Step 3 Select the zone that needs to be set, and then set sensitivity.
Press or to move the cursor to a zone (for example, L1Zo), and then press to
set the value.
●
L1Zo–L6Zo: The detection sensitivity of left detector panel (models with 12 zones and
18 zones) and models with 6 zones.
●
R1Zo–R6Zo: The detection sensitivity of right detector panel (models with 12 zones and
18 zones).