User Guide

15
4.3 Detector Operations
4.3.1 Login
You can log in to the Device with the default password (000000). Change the password the first time
you use it.
Procedure
Step 1 Connect the power supply, press the switch button.
The main interface is displayed.
Step 2 Enter the password.
Press or to move the cursor, and then press to set the number.
Step 3 Press to move the cursor to
OK
, and the press to confirm the password.
If the password is wrong, the error note will be displayed.
Figure 4-3 Password error
Related Operations
If you forget the password, long press the reset button for more than 5 s to restore the Detector, and
then the Detector restarts.
4.3.2 Setting Sensitivity
Sensitivity can be set separately for each zone. It ranges from 0 to 255. The higher the value is, the
more sensitive the Device is.