User Guide

14
No. Description
5
Displays metal position indication with 18 indicators (red zone).
This function is only available on 18-zone detectors.
4.2 Remote Control
You can set the parameters of the Device remotely through the remote control. Install the batteries
before using the remote control.
Figure 4-2 Remote control
Table 4-2 Operation description
No. Name Description
1 Power Turn on or off the Device.
2 Reset
Press the button, and the number of passes and alarm
times will be cleared.
3 Direction
●
Press the buttons to switch and select menus.
●
When setting a parameter, press left or right button to
move the cursor, and then press up or down button to
change the number or parameter value.
4 Confirm
●
Go to the parameter setting interface.
●
Confirm and save the setting.
5 Menu
Press the button to switch menus quickly. If the current
parameter is the last one, press this button to switch to the
first one.
6 Back
Returns to the previous menu or exits the menu setting
interface.
7 Home Go to the home page.