User Guide

13
4 Detector Configuration
4.1 Configuration Panel
Figure 4-1 Configuration panel
Table 4-1 Configuration panel description
No. Description
1
Displays number of passes, alarm times, signal strength bar, mode (normal, test, or
alarm), current working frequency, volume and time.
●
With increase of the detected metals, the color will grow from green to red.
There are 10 degrees: Degree 1-4 is green, degree 5-7 is yellow, and degree 8-
10 is red. When the degree is up to 8, an alarm will be triggered.
●
Different colors of mode icon indicate different modes:
◇
Yellow: Test mode.
◇
Green: Normal mode.
◇
Red: Alarm.
2
●
Power switch. Turn on or off the Device.
●
Press and hold the button for 3 s to clear the counting
data.
/ Select buttons. Press or to move the cursor.
●
Go to the parameter setting interface.
●
Set parameter value.
●
Confirm and save settings.
Returns to the previous menu or exits the menu setting
interface.
3 IR sensor.
4 Power indicator light.