User Guide

5
3 Installation
3.1 Checklist
After receiving the product, check against the table below. If there are any problems, contact the
after-sales service personnel.
Table 3-1 Checklist
No. List Description
1
Overall
packaging
Appearance Obvious damage
Packaging Accidental impact
Accessories Complete or not
2 Host
Appearance Obvious damage
Model
Whether consistent with the order
contract
Table 3-2 Packing list
Name Quantity
Detector panel 2
Host box 1
Beam 2
Power cable (power input) 1
DB25 cable 2
Fixing screws (M6 × 16) 4
Fixing screws (M8 × 80) 8
Remote control 1
Wrench 1
Thermal camera 1
Thermal camera fixing bracket 1
Thermal camera fixing screws 5
3.2 Environment Requirements
●
The ground is flat and sturdy
The ground should be flat and firmly supporting to prevent vibration. If there is a vibrating metal
structure under the ground, there can be unnecessary alarm when people pass through the
metal detector.
Do not install the detector on a metal ground.
●
Keep away from fixed metal objects
Large metal objects that are fixed or immobile should be at least 50 cm away from the detector
(detecting large metal objects) because they might make the Device more susceptible to
vibration.