Operation Manual

Dahua Network Camera Web 3.0 Operation Manual

Parameter

Function

PTZ

 Here you can set PTZ movement when alarm occurs. Such as go to

preset x when there is an alarm.

 The event type includes: preset, tour and pattern.

Snapshot

You need to check the box here so that system can backup motion detection

snapshot file. You shall set snapshot period in Storage>Schedule.

Step 4

Click “Save” to complete the setup of scene changing.

5.3.2 Audio Detection

Step 1

Select “Setup > Event > Audio Detection” and the system will display the interface of “Audio Detection”

which is shown in Figure 5-68.

Figure 5-68

Step 2

It is to set the parameters of audio detect, please refer to the following sheet for more details.

Parameter

Function

Enable input

abnormal

Select “Enable Input Abnormal” and it will trigger alarm when it detects

audio input abnormity.

Enable intensity

change

Select “Enable Intensity Change” and it will trigger alarm when it detects

that audio intensity change exceeds the threshold.